Hydrastar® 3.5K Axle Rated 1600 PSI Trailer Brake Actuator and Complete Single Axle Trailer Brake Installation Kit (Slip Over, 1/2 in.)

Description

• Complete ‘Installation Kit’ Includes:
  • (1) 381-7067 – Hydrastar® Electric Over Hydraulic (EOH) Trailer-Mounted Brake Actuator (1600 PSI)
    • Durable, sealed, fully enclosed extruded anodized aluminum housing case to easily withstand the environmental and road demands (not cast or plastic).
    • 2 YEAR LIMITED WARRANTY from date of purchase.
    • Complies with CFR-393 Federal Braking Requirements and meets all Department of Transportation (D.O.T.) regulations.
    • Designed for Drum and Disc Brakes with reliable 12 V DC operation and solid-state electronics.
    • Color-coded, heavy duty 12 Gauge wire for easy and quick install.
      (Black/Constant power, Blue/Brake controller, White/Ground, Yellow/Break-away)
    • 4 ft. Wire, Enough Length to Customize Any Job.
    • Required use of D.O.T. 3 or 4 Brake Fluid. (Not included.)
    • Compatible with any trailer configuration with 1-3 axles.
  • (1) E303-3K1SO-A – Hydrastar® 3.5K Rated, Dacromet Coated Integral Single Axle Brake Kit (1/2 in.)
    • Corrosion-resistant Dacromet Coating for Industry Standard trusted performance.
    • 1/2 in. wheel studs
    • 1 Year Limited Warranty
    • Complete 3.5k Single Axle Brake Set, which includes:
      • (2) 303-E3R1SO 3.5K Lbs. Axle Rated Slip Over Dacromet Coated Rotor
      • (2) 303-E36C 3.5K/6K Lbs. Axle Rated, Dacromet Coated Single (1) Hydraulic Disc Brake Caliper
      • (2) 303-E3BU 3.5K Slip Over Dacromet Coated Bracket
  • (1) 496-151 – Hydrastar® Hydraulic Single Axle Brake Line Kit – 15 ft., 3/16 in., 3000psi hydraulic brake pressure
    • The Hydrastar® Brake Line Kit includes:
      – Brake Lines
      – Fittings
      – Required Hardware
    • Corrosion resistant, high-performance alloy tubing backed by a Lifetime Guarantee.
    • Triple annealed and eddy-current tested, Hydrastar® brake lines are walled 40% thicker preventing kinking and allows simple routing and smooth bends without bending tools required.
    • Meets SAE J1650 Standards (0.028 in.)
    • Made in USA
  • (2) L68149 – Hydrastar® 3.5K Rated Inner Bearing
  • (2) L44649 – Hydrastar® 3.5K Rated Outer Bearing
  • (2) 408004 – Hydrastar® 3.5K Rated Seal