This kit includes the wiring and mounting hardware needed to install the Hydrastar trailer brake actuator.? The Break-Away Battery Kit is available to complete the full installation.
Kit Includes:
7-way Trailer Plug
Junction Box
1 x 12 ga Grounding Wire
8 x 14 ga Ring Connectors (heat shrink)
9 x 12 ga Ring Connectors (heat shrink)
1 x 14 ga Butt Connector (heat shrink)
1 x 12 ga Butt Connector (heat shrink)
1 x 6 ft. Wire Loom
4 x Adhesive Mounting Pads
4 x Self Tapping Screws
| Weight | 7 lbs |
|---|---|
| Dimensions | 5 × 11 × 13 in |
Only logged in customers who have purchased this product may leave a review.
For use with Hydrastar XL and Electrastar. It is easy to install, easy to access, and built to take the weather and shock of trailer life. Also, it is ideal for other systems requiring a higher amp/hr battery. The new molded box is made of weather and shock-resistant glass-filled nylon. The kit also includes a 12v-17amp, sealed lead acid battery requiring no maintenance, and a break-away switch.
Built-in battery charger charges the battery when plugged into the tow vehicle. Activates trailer brakes upon separation of trailer and tow vehicle. For use on trailer with up to 3 axles. Includes trailer-mounted Break-Away battery box, battery, battery charger, and Break-Away switch.
The Hydrastar Controller Adapter Module (CAM) circumvents the lack of technology in some brake controllers to allow the Hydrastar hydraulic trailer brake actuator to communicate with the tow vehicle, resulting in proper brake function.
By installing the Hydrastar CAM, the Hydrastar line of hydraulic trailer brake actuators are compatible with all tow vehicle brake controllers.
The Hydrastar CAM is easy to install, with only 2 wires, has a sealed, anodized aluminum housing to protect the internal components from all weather conditions, and can be easily installed at any convenient location on the trailer.
Reviews
There are no reviews yet.